General Irrigation

Manufacturing of plastics water tank, irrigation pipes and water supply, programmers, Hydro geological mapping of groundwater resources, general agricultural engineering designs including irrigation designs and structural development and sustainable land management.

Consultancy Firm

Dealing in Sustainable land management and water for Agricultural Production, consultancy services in the fields of water harvesting, irrigation designs, sustainable land management and constructing and management of greenhouses.

Highly experienced bodies

Professionals who are fully qualified and of high moral standards, full expertise in Water resources management, sustainable land management, agricultural production, Irrigation system design and implementation, greenhouse design, construction and management.

Leading Consulting firm in Rwanda

Both technical and financial capabilities of water harvesting, irrigation designs, sustainable land management and constructing and management of greenhouses.

Manufacture of HDPE & PP-R pipes

We are spscicialzed industry in durable HDPE & PP-R pipes of high quality

01.

Expert Members

02.

Awards & Accolades

03.

Thought Leadership

prowater tanks

Pro Water Plastic Tanks

Made in Rwanda, Best of all, 1,000 to 10,000 Liters, No Leaks, Readily available, easy to clean, Longer life-span, No change in water taste, Easy to install

Longer lasting water storage tank, Safe for storage of water, Availbale in Rwanda, Best for above ground, stationery use, Leak-proof, no joins, very strong, Maintenance - free, easy for installation, friendly price, on base made from the brick, stone or block, walling filled with soil and sieved sand.

  • 1 Select a flat near your house
  • 2 Make sure ground is resonably stable, level, firm and relatively high point to prevent flooding.
  • 3 Build a wall of stones, bricks or blocks of a desired height, ensure that the inside diameter wwall is larger than the diameter of the tank
  • 4Pour a fine soil evenly within the wall parameter and top up with sieved sand in the ratio of 2/3 soil to 1/3 sand
  • 5Level area with a rake, make sure that there are no sharp object such as stone, glass before installing the Tank
  • 6It is advisable to clean the tank after six months
  • 7Always drill holes in the tank with advisable equipments, not with hot rods.

prowater tanks

Approx Water Storage Tank Size

prowater tanks

Above ground tank installation instructions

Vertical cylindrical dome top tanks may hold from 200 litres or fifty gallons to several million gallons. Horizontal cylindrical tanks are typically used for transport because their low-profile creates a low center of gravity helping to maintain equilibrium for the transport vehicle, trailer or truck.
A Hydro-pneumatic tank is typically a horizontal pressurized storage tank. Pressurizing this reservoir of water creates a surge free delivery of stored water into the distribution system. Glass-reinforced plastic (GRP) tanks/vessels are used to store liquids underground.

prowater tanks

  • 1 Install tank at desired height (H)
  • 2 The stand must be made of strong metal or tube of 60x60 mm to withto withstand the height of the tank
  • 3 The stand must have the stairs to facilitate the future installation and maintenance
  • 4The top base of the stand where tank will be deposed, should be larger enough by the reference to the diameter
  • 5Clean your tankonce in 6 months, Get inside of the tank, Clean using dry and wet clothto remove the dirty in inside only, twist the used cloth to dry it and repeat the same procedure until the tank is full clean
  • 6Don't use any chemicals like solid or liquid soap to clean
Tank size
Ccv 1000
Ccv 500
Ccv 300
Ccv 200
Ccv 100
Liters
10000
5000
3000
2000
1000
Diameter
255
188
163
130
103
Max height
215
210
170
153
140

Lets Get in Touch!

Call Us, Email us anytime to get information you need.

Call us

+250 788 351 338 | +250 784 661 424